Novus NVIP-4V-8002M, Руководство пользователя

Страница: 11 / 44

NVIP - 4V - 8002M User ’ s manual (short) ver.1.1
All rights reserved © AAT Holding S.A.
11
Camera module is placed on a mount allowing 3 - axis module position adjustment.
WARNING!
Please pay attention to wires connecting camera module with camera body, while you are
adjusting camera module position.
2.3. Connecting Ethernet cable
To maintain tightness of Ethernet cable connection, please follow instruction below:
1. Loosen the nut (a) from the main element (b).
2. Run power cable (without RJ - 45 connector) though both elements. Then crimp the cable with RJ - 45
connector. Install rubber gasket (d) on the connector (c).
3. Connect the cable to the waterproof connector (c), screw main cover (b), then screw the nut (a).
Caution: The other camera connectors are not waterproof. User should seal them by himself.
Caution:
It is forbidden to use – as the camera power source – PoE equipment (adapters, etc.) not
compatible with IEEE 802.3af standard (items called “ passive PoE power supply ”). Damages that
results from the usage of improper power supply source are not covered by the warranty.
a
b
a
b
c
d
START - UP AND INITIAL CAMERA CONFIGURATION