Novus NVIP-3SD-8200/30, Быстрый старт

Страница: 12 / 40

NVIP - 3SD - 8200/30 Quick start guide ver.1.1
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
12
2.4. Starting the IP camera
To run NOVUS IP camera connect 24 VAC power supply or NV - 8000PS/HP High PoE Injector.
Initialization process takes about 1 minute. Then you can proceed to connect to the camera via web
browser.
The recommended way to start an IP camera and perform its configuration is a connection to the PC
via the network switch which is not connected to other devices.
To obtain further information about network configuration parameters (IP address, gateway, network
mask, etc.) please contact your network administrator.
•
Connection using external power supply and network switch
•
Connection using the network switch and power supply of the camera via the
High PoE NV - 8000PS / HP power supply
START - UP AND INITIAL CAMERA CONFIGURATION
IP Camera
Network transmission
Network
transmission
Network Switch
Computer
Power supply
Network
transmission
Network
transmission
Power
and Network
Network
switch
Computer
IP Camera
NV - 8000PS/HP