NVIP
-
3DN7030SD/IRH
-
2P User’s manual (short form) ver.1.3
All rights reserved © AAT Holding S.A.
12
2.4. Starting the IP camera
To run NOVUS IP camera you have to connect 24 VAC or 12 VDC power supply or Ethernet cable
between camera and High PoE network switch with parameters compatible with camera power supply
specification.
Initialization process takes about 30 seconds. You can then proceed to connect to the camera via web
browser.
The recommended way to start an IP camera and perform its configuration is a connection to the PC via
the network switch which is not connected to other devices.
To obtain further information about network configuration parameters (IP address, gateway, network
mask, etc.) please contact your network administrator.
•
Connection utilizing external power supply and network switch
•
Connection utilising external power supply directly to the computer
Information:
Power supply adapter is not included. Please use power adapter with parameters specified in user ‘s
manual.
CAUTION!
In order to provide protection against voltage surges/lightning strikes, usage of appropriate surge
protectors is advised. Any damages resulting from surges are not eligible for service repairs.’
START
-
UP AND INITIAL CAMERA CONFIGURATION
IP Camera
Network transmission
Network
Network Switch
Computer
Computer
IP Camera
Network
transmission
