Novus NVIP-2Q-4201/PIR/W, Быстрый старт

Страница: 20 / 44

NVIP - 2Q - 4201/PIR/W Quick start guide ver. 1.0
All rights reserved © AAT Holding S.A.
20
4. CONNECTION FROM A DEVICE EQUIPPED WITH ANDROID SYSTEM
To connect to the camera from an Android device, use the RXCamView application.
5. RESTORING FACTORY SETTINGS
5.1 Software factory reset
The camera allows to reset its settings to the factory defaults. To restore the camera settings, go to the
"Load Default" tab (Remote Setting
- > Advanced - > Load Default). Then select the camera options and
functions whose settings you want to reset and press the "Save" button.
Resetting to factory settings is also possible with the "Device Config Tool" application.
After about 30 seconds you will be able to reconnect to the camera (on the current IP address, if the
network settings have not been reset, or on the default IP address).
5.2 Hardware factory reset
To reset the camera to the factory default settings, use the RESET button located on the back. Press and
hold it for about 5 seconds.
After about 30 seconds you will be able to reconnect to the camera at the default IP address.
CONNECTION FROM A DEVICE EQUIPPED WITH ANDROID SYSTEM
- enables and disables audio transmission from the camera to the computer
- enables and disables audio transmission from the computer to the camera
- turns the white LED on and off (warning light)
- turns the siren on and off
A description of all camera functions is included in the full user manual on the product page at
www.novuscctv.com