NVIP-2DN5041V/IRH-1P, NVIP-3DN5041V/IRH-1P, NVIP-5DN5041V/IRH-
1P User’s manual
(short form) ver.1.0
All rights reserved © AAT Holding sp. z o.o.
10
2.3 Zoom and focus adjustment
1. Use the included allen key to remove the camera cover dome screws and remove cover dome.
2. Adjust zoom and focus.
3. Ensure the rubber gasket inside the camera is properly in place, then mount the camera cover do-
me and the camera cover screws.
Camera module is placed on a mount allowing 3-axis module position adjustment.
WARNING!
Please pay attention to wires connecting camera module with camera body, while you are
adjusting camera module position.
START-UP AND INITIAL CAMERA CONFIGURATION
Zoom
Focus
