NVIP-2DN5000V/IR-1P, NVIP-3DN5000V/IR-1P, NVIP-2DN5020V/IR-1P User’s manual
(short form) ver.1.1
All rights reserved © AAT Holding sp. z o.o.
19
5. ELECTRIC CONNECTORS AND ACCESORIES
5.1. Connecting power supply to the camera.
Camera can be supplied using external power supply unit corresponding with the camera parameters or
by using RJ45 network socket and PoE (IEEE 802.3at) power supply unit.
Information:
Power supply adapter is not included. Please use power adapter with parameters specified in user’s
manual.
Caution:
In order to provide protection against voltage surges/lightning strikes, usage of appropriate surge
protectors is advised. Any damages resulting from surges are not eligible for service repairs.
5.2. SD card installation
Camera supports SD/SDHC cards up to a maximum size of 64GB. SanDisk™ or Kingston™ brand
microSD cards are recommended. In order to install the card properly, please follow the instructions
below:
For cameras
NVIP-2DN5000V/IR-1P, NVIP-3DN5000V/IR-1P
Turn the camera off
Unscrew two screws holding camera cover using allen key and remove camera cover.
Mount SD card in the socket located at the camera’s base, according to the picture:
Mount camera cover and screw to camera base.
Turn the camera on
Check the SD card by checking its capacity in the
Local Record -> Record Directory
tab
.
ELECTRIC CONNECTORS AND ACCESORIES
microSD card
