Novus NVIP-2C5000ATM, Руководство пользователя

Страница: 10 / 40

NVIP-2C5000ATM User’s manual ver.1.1
(short form)
All rights reserved © AAT Holding S.A.
10
2.3. Starting the IP camera
To run NOVUS IP camera you have to connect it via power supply adapter with parameters compatible
with camera power supply specification. Check details in chapter 5.1
Initialization process is then started which can take about 2 minutes. You can then proceed to connect
to the camera via web browser.
The recommended way to start an IP camera and perform its configuration is a connection directly
to the network switch which is not connected to other devices. To obtain further information about
network configuration parameters (IP address, gateway, network mask, etc.) please contact your
network administrator.

Connection utilising external power supply and network switch

Connection utilising external power supply directly to the computer
Note :
Power supply adapter is not included. Please use power adapter with parameters specified in user‘s
manual.
START-UP AND INITIAL CAMERA CONFIGURATION
IP Camera
Network transmission - cross over cable
Computer
IP Camera
Network transmission Network transmis-
Network Switch
Computer