NVIP-1DN5001H/IRH-
1P User’s manual ver.1.0
(short form)
All rights reserved © AAT Holding sp. z o.o.
11
When installing on the wall put your camera in the desired location, and set the camera position then
tighten the locking ring clockwise rotation.
Mark the fixing points and transition to cable using camera base or template in desired position.
4. Mount the camera in a designated area using the included mounting studs. Connect power network
as required either before or after bracket is attached to surface, if you are making hole for cable in
surface for pass-thought then be sure this task is completed before the bracket is attached to the
surface.
Caution : Make sure to follow the correct polarity if connecting the camera to DC power. The
central pin is positive polarity
.
START-UP AND INITIAL CAMERA CONFIGURATION
