NVIP-3000 series IP camera user’s manual
All rights reserved © AAT Holding S. A.
23
4.4.6 UPnP
Camera got function UPnP. To turn function on, user have to select
ENABLE
and give camera
UPnP Name
that would be visible on the network.
4.4.7 Email
In order to configure email address, user
need to use mail with SMTP server. User
need to fill Sender Address, User Name
email password,
Server SMTP
, secure
connection and port. In the same tab you can
also add receiver Addresses. After filling up
all tables user have to click
SAVE
button to
save all changes. In the end we make click
TEST
button to check correct configuration.
CAUTION!
Before filling up sender configuration there
is no option to add any receiver address.
Camera can hold up to 8 email receiver
address.
CONFIG
