NVC-GDN4801V/H-2, NVC-GDN4801V-2, NVC-GDN4801V/IR-2, NVC-GDN4801V/IRH-2
1.3 version - User’s manual
All rights reserved © AAT Holding sp. z o.o.
22
SYNC
Selects synchronization mode.
INT
Internal synchronization.
L / L
Line synchronization (24V AC power supply). Pressing
SET
displays additional
submenu allowing for adjusting
PHASE
level from 0 to 359 degrees.
MODE
position additionally allows to switch the synchronization between luminance and
chrominance.
MOTION DET
This menu allows (provided, that
ON
option is selected) for turning a built-in
motion detection feature on or off. Motion detection may simultaneously be
conducted in eight independent zones (with their size and location selectable by
user). Detection of motion with
MOTION DET
turned on results in
Motion
Detected
message being displayed on the screen.
After selecting
ON
and pressing SET the submenu below is displayed, which
allows for adjusting the motion detection function parameters.
SENSITIVITY
Selects one of eight available motion detection zones (
AREA1, AREA2
,
AREA3, AREA4, AREA5, AREA6
,
AREA7, AREA8
). Each zone has
different sensitivity level. The higher number, the higher sensitivity.
AREA MODE
Turns motion detection in selected zone on or off.
SEL POS
Selects edge of the area so its position can be changed.
L_BOTTOM
Left bottom area corner.
R_BOTTOM
Right bottom area corner.
L_TOP
Left top area corner.
R_TOP
Right top area corner.
YPOS
Change the selected area corner position toward vertical axis.
XPOS
Change the selected area corner position toward horizontal axis.
FILL
SET
After pressing
SET
button actually selected area will appear on the first plan.
Note: Disabling privacy zones prior to setting motion detection parameters is advised.
SETTINGS
MOTION DET
1. SENSITIVITY AREA1
2. AREA MODE OFF
3. SEL POS
R_BOTTOM
4. YPOS
ιιιιιιιιιιιιι
x
ιιιι
5
5. XPOS
ιιιιιιιιιιιιι
x
ιιιι
5
6. FILL
SET
8. RETURN
