NVB
-
8005JB
-
user
’
s manual ver. 1.1
All rights reserved ©
AAT SYSTEMY BEZPIECZEŃSTWA sp. z o.o.
5. Installation manual
1. Pick a suitable location and provide all necessary wiring to the desired housing mounting place.
2. Using a template, mark mounting location and drill holes for mounting screws.
3. Unscrew cover from the base of the bracket
4. Put wiring through one of the holes in bracket base. Plug unused holes with attached sealing
end caps. If using side holes, use cable gland (not included).
5. Screw the base of bracket to the wall or ceiling. If mouting on the wall it is recommended
to mount bracket, so the
“
TOP
”
caption pointing up.
6. Put the camera wires through the silicon cable gasket and plug cable gasket in central hole in the
cover. Choose one of the two available gaskets matching the diameter of the cable.
7. Connect the camera cables with the cables inserted into the adapter base, screw the adapter cover
and mount the camera on the cover.
CAUTION:
Pay special attention to ensuring that the surface to which the camera bracket
is attached is even and has a suitable load capacity.
AAT SYSTEMY BEZPIECZEŃSTWA sp. z o.o.,
ul. Puławska 431, 02
-
801 Warsaw, Poland
tel.: +48 22 546 07 00, fax: +48 22 546 07 59
www.novuscctv.com
14.07.2020 JZ MM MK (PF)
Location of mounting holes for
various camera models
are marked with the appropriate
letters. Each letter corresponds
to the installation of another camera
or cameras series.
A complete list of compatible
cameras and camera series can be
found on the product page
www.novuscctv.com/en,
in the download section.
NVB
-
8005JB
