Novus NVAHD-2DN5202MV/IR-1, Руководство пользователя

Страница: 8 / 36

NVAHD-2DN5202MV/IR-1 - user’s manual ver. 1.0
All rights reserved © AAT Holding S.A.
8
INSTALLATION
4. INSTALLATION
Please familiarize yourself with the device, its parameters and methods of mounting, before
mounting .

Put mounting drawing paper to the wall or ceiling and mark drill holes.

Drill holes using markings.

Drill additional hole for cables.

Using mounting screws from the package, attach the base of camera to the ceiling/wall (holding
the camera with hand if needed).

Put video and power cables through a base of camera and a previously drilled hole in the wall/
ceiling.

Put the dome cover on the camera (holding the camera with hand if needed).

Put the stopping ring on the dome cover and gently screw it to the base .

Manually point the camera in a desired direction to obtain a desired scene view.

Screw the stopping ring firmly (holding the camera with hand if needed).

Make the appropriate camera settings via the OSD menu
4.1. Power supply connection
NOTE: Device should be supplied only from a power sources whose parameters are in
accordance with those specified by producer in the camera’s technical datasheet. Therefore, it is
forbidden to supply the camera from power sources whose parameters are unknown, unstable
or not meeting the producer’s requirements.
4.2 Zoom and Focus Setting
The camera has a motor-zoom lens that can be controlled using a joystick mounted on the signal cable
or via a protocol COAX operated from the recorder or the remote control. Use the
UP, DOWN
keys to
set the desirable zoom and the camera will automatically adjust itself to that see focused plan. To
manually adjust the focus use the keys
LEFT, RIGHT
.
Video
(GND)
+
- (GND) Power Supply 12V DC +/- 10%
Video