Novus NVAHD-1DN5102V/IR-1, Руководство пользователя

Страница: 8 / 36

NVAHD-1DN5102V/IR-1 - user’s manual ver. 1.1
All rights reserved © AAT Holding S.A.
8
INSTALLATION
4. INSTALLATION
Please familiarize yourself with the device, its parameters and methods of mounting, before
mounting .

Put mounting drawing paper to the wall or ceiling and mark drill holes.

Drill holes using markings.

Drill additional hole for video and power cables.

Using mounting screws from the package, attach the base of camera to the ceiling/wall (holding
the camera with hand if needed).

Put video and power cables through a base of camera and a previously drilled hole in the wall/
ceiling.

Put the dome cover on the camera (holding the camera with hand if needed).

Put the stopping ring on the dome cover and gently screw it to the base .

Manually point the camera in a desired direction to obtain a desired scene view.

Screw the stopping ring firmly (holding the camera with hand if needed).

Adjust zoom and focus if needed using adjustment screws. It is recommended to check focus
settings in infrared illumination and make correction in color mode to have proper focus in both
modes.

Make the appropriate camera settings via the OSD menu
NOTE:
It is possible to switch camera into analog 960H mode, which is e.g. compatible with service
monitor. To change mode tilt the joystick to the left and hold for about 5 seconds. To return to
the AHD mode, tilt the joystick to the right and hold for about 5 seconds. The default mode of
the camera is AHD mode.
By pressing and holding the joystick down (DN) camera switches between PAL and NTSC
systems. The default operating mode of the camera is PAL.
4.1. Power supply connection
NOTE: Device should be supplied only from a power sources whose parameters are in
accordance with those specified by producer in the camera’s technical datasheet. Therefore, it is
forbidden to supply the camera from power sources whose parameters are unknown, unstable
or not meeting the producer’s requirements.
video
12V DC +/- 10% power supply
video
(GND)
+
- (GND)