manualshive.com logo in svg

Novus NR2316-OG, Руководство пользователя

Поделиться
Скачать
Novus NR2316-OG Скачать руководство пользователя страница 49

 

 

Users manual 

NR2316-OG 

Revision #: 

E 

Date:  

5/4/18 

 

Page  #: 

49 of 50 

www.novuspower.com 

 

 

PERIOD. The LIMITED WARRANTY PERIOD starts on the date of  shipment and for the period of 1 (one) year to be 
free from defects caused by faulty materials  or poor workmanship, provided: 
 (a) NOVUS is notified in writing by Buyer of such defect  prior to the expiration of the warranty period, and 
 (b) after receiving return authorization –RMA- from NOVUS, the defective item is returned with transportation 
prepaid to NOVUS, St. Charles, Missouri, with transportation charges prepaid by Buyer …see RMA policy in Terms 
and conditions, and 
 (c) NOVUSs’ examination of such unit shall disclose to its satisfaction that such defect(s) exist and have not been 
caused bisuse, neglect, improper installation, improper storage, unauthorized modifications, inadequate maintenance, 
operation outside the environmental specifications for the product, repair alteration, or accident.  NOVUS assumes no 
risk or liability for results of the use of products purchased from it, including but without limiting the generality of the 
foregoing: (1) the use in combination with any electrical or electronic components, circuits, systems, assemblies or any 
other materials or substances; (2) unsuitability of any product for use in any circuit or assembly.  Removal or tampering 
with tamper-proof label on merchandise will void warranty coverage unless with the written authorization from 
NOVUS  
 (d) an evaluation fee will be charged to Buyer to cover inspection and testing costs for any item returned by Buyer 
under this paragraph which is found to be within specifications and/or otherwise not the responsibility of NOVUS 
under the terms and conditions of this paragraph or any other part of this Agreement.. 
 Your dated sales or delivery receipt is your proof of the purchase date. You may be required to provide proof of 
purchase as a condition of receiving warranty service. You are entitled to hardware warranty service according to the 
terms and conditions of this document if a repair to your NOVUS product is required during the limited warranty 
period. Our obligation at NOVUS is limited to repair or replace  products which prove to be defective. 
 
Should Novus be unable to repair or replace the product within a reasonable amount of time, the customer’s alternate 
remedy shall be a refund of the purchase price upon return of the product to Novus.  The liability of NOVUS under this 
warranty is limited to replacing, repairing or issuing a credit, at its option, for any such item returned by Buyer under 
the terms of this warranty. 
                                                     

EXCLUSIONS

: The above warranty shall not apply to defects resulting from improper or inadequate maintenance by 

the customer, customer-supplied software or interfacing, unauthorized modification or misuse, operation outside of the 
environmental specifications for the product or improper site preparation and maintenance (if applicable). For probes, 
cables, antennas and accessories, the warranty period is 90 (ninety) days. 
  

PRODUCT SPECIFICATIONS

: Published specifications whether contained herein or in any other materials or 

documents distributed to Buyer by Novus do not become final or binding on NOVUS until approved by NOVUS. 
NOVUS expressly reserves the right to change or modify specifications at any time without prior notice.  
 

WARRANTY LIMITATIONS

: NOVUS MAKES NO OTHER WARRANTY, EITHER EXPRESSED OR 

IMPLIED, WITH RESPECT TO THIS PRODUCT.  NOVUS SPECIFICALLY DISCLAIMS THE IMPLIED 
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR  PURPOSE. 
 
IN ALL CIRCUMSTANCES NOVUS’  MAXIMUM LIABILITY IS LIMITED TO THE PURCHASE PRICE OF 
THE PRODUCTS SOLD. NOVUS SHALL NOT, UNDER ANY CIRCUMSTANCES BE LIABLE UPON A CLAIM 
OR ACTION IN CONTRACT, TORT, INDEMNITY OR CONTRIBUTION OR OTHER CLAIMS RELATING TO 
THE PRODUCTS IT SELLS WHICH EXCEEDS THIS LIABILITY LIMIT. NOVUS SHALL NOT BE LIABLE 
FOR THIRD PARTY CLAIMS FOR DAMAGES AGAINST THE CUSTOMER, OR FOR MALFUNCTION, 
DELAYS, INTERRUPTION OF SERVICE, LOSS OF BUSINESS, LOSS OR DAMAGE TO EXEMPLARY 
DAMAGES, WHETHER OR NOT NOVUS HAS BEEN MADE AWARE OF THE POSSIBILITY OF SUCH 
CLAIMS OR DAMAGES. 
. 

LIMITATION OF REMEDIES

: REGARDLESS OF WHETHER ANY REMEDY SET FORTH HEREIN FAILS 

OF ITS ESSENTIAL PURPOSE, IN NO EVENT WILL NOVUS BE LIABLE TO YOU FOR ANY SPECIAL, 
CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES, INCLUDING, WITHOUT LIMITATION, DAMAGES 
FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF DATA OR BUSINESS 
INFORMATION (OR OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF OR INABILITY TO USE 
THE HARDWARE SUPPLIED THEREWITH EVEN IF NOVUS OR ANYONE ELSE HAS BEEN ADVISED OF 
THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY.  EXCLUDED 
DAMAGES SHALL INCLUDE, BUT ARE NOT LIMITED TO: COSTS OF REMOVAL AND INSTALLATION, 
LOSSES SUSTAINED AS THE RESULT OF INJURY TO ANY PERSON, OR DAMAGE TO PROPERTY.

 

 

Содержание NR2316-OG





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды