NHDR
-
6004
-
H1
-
II, NHDR
-
6008
-
H1
-
II
User
’
s manual (Short) ver.1.1
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA SP. Z O.O.
10
NHDR OPERATING
2.6.
Connecting external devices
•
Connecting audio ports
Audio output signal normally are above 200mV 1k
Ω
. You can connect to it the audio amplifier with the
external speakers.
•
Connecting USB devices
The NHDR
-
6004
-
H1
-
II, NHDR
-
6008
-
H1
-
II recorders have 2 USB 2.0 ports on the rear panel. The
ports allow you to connect a USB memory, mouse and other compatible USB devices.
3. NHDR OPERATING
3.1.
Front panel description
1.
POWER
Power supply signaling diode
2.
IR PORT
Infrared receiver for remote control (remote controller sold separately
as an accessory)
-
REC
-
recording started
-
NET
-
network activity
-
PWR
-
power supplay activity
2.
USB
USB 2.0 port for connecting a mouse with a USB connector or Flash
memory for copying recordings.
3.2. Controlling via USB mouse
It is possible to control NHDR via an USB mouse connected to the USB port. Double
-
click on any
camera in split screen display mode switches the display to full
-
screen mode. Subsequent double
-
click
returns to previous display mode. Move cursor to the top or click the right key of mouse to bring up
MAIN MENU and select START icon.
Certain positions allow to select them via mouse scroll. Depending on NHDR operating mode, pressing
RMB displays a corresponding function menu.
Note:
If the currently selected NVR menu language is not as expected, to change it, please follow the
procedure described in chapter 4.3 of this manual.
1
2
