Novus NHDR-5132AHD, Руководство пользователя

Страница: 13 / 52

NHDR-5132AHD User's manual (short) ver. 1.1
All rights reserved © AAT Holding S.A.
13
DVR OPERATING
3.2. Controlling via IR remote controller
The set includes an IR remote controller. Its range depends on battery status and may vary
between a few and few tens of meters. Controller is supplied by two AAA batteries. Buttons functions
are listed below.
0 - 9 Numeric buttons are used for channel selection. For channels from 10-
16 press the button combination. F.e. to open the channel 15 press „1” then „5”.
ALL Toggles between different display formats: 1, 4, 9, 16.
MENU Enters to main menu. Pressing this button cancel the selection and
leaving the menu also.
SUBMENU In live mode open the Popup menu.
Navigation control „left”, „right”. In live mode open the Popup menu.
Navigation control „up” , „down”.
SEL Button is used for confirm the selection and start to editing fields. In
live mode open the Popup menu.
Switch on playback mode. Open Record Search menu. In live mode
open the Popup menu.
Slow down playback speed.
Fast up playback speed.
Turn on manual record.
Playback pause, press again to play frame by frame.
Stop the playback. In live mode stop the manual recording.
3.3. Controlling via USB mouse
It is possible to control DVR via an USB mouse connected to the USB port. Double-clicking on any
camera in 2x2, 3x3 display mode switches the display to full-screen mode. Subsequent double-click
returns to previous display mode. Move cursor to the bottom of the screen displays popup menu. Press
left mouse button on the channel video to display channel menu. Certain positions allow to select them
via mouse scroll. Depending on DVR operating mode, pressing RMB display popup menu, or leave the
menu.
3.4. Main screen
To start the unit, connect the AC adapter, turn on the switch on the rear panel of the unit. After the
initialization process Main screen and Startup wizard appears. You can follow the Wizard and
configure basic DVR settings. Detailed information about Wizard is in chapter 3.8 in user’s manual. If
you cancel or finish the Wizard, main screen is available. It is shown on next page, with its
components.
Note! Default user is admin and password protection is disabled (leave password field empty).
Activating at least one user (except admin), result displaying login window.