NHDR
-
4308
-
H2
Quick start guide
version 1.0
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
7
CAUTION!
If the device was brought from a location with lower temperature, please wait until it reaches the
temperature of location it is currently in. Turning the device on immediately after bringing it
from a location with lower ambient temperature is forbidden, as the condensing water vapour
may cause short
-
circuits and damage the device as a result.
Note: Please familiarize yourself with description and functions of rear panel inputs.
The pictures of the recorders contained in this manual are for illustrative purposes and may
differ slightly from the actual device.
2.
STARTING THE DEVICE
2.1.
Electrical connection and other rear panel elements of NHDR
-
4308
-
H2.
1. AUDIO IN:
Audio mono inputs (RCA LINE IN type) to connect microphones.
2. AUDIO OUTPUT:
Audio output to connect speakers with amplifier (RCA connector).
3. VIDEO IN:
Video inputs to connect video signal sources to the DVR
.
4. HDMI:
HDMI connector to connect main monitor using HDMI cable.
5. VGA:
D
-
SUB connector to connect main monitor using VGA cable.
6. RESET:
Hidden Reset button. Pressing the button for 3 seconds resets the administrator
password. Pressing the button for 8 seconds restores the recorder to the factory
settings.
7. SENSOR:
Alarm inputs, which may be set as normal open (NO) or normal closed (NC)
in the DVR menu. The ground of the alarm device needs to be connected to
one
of the G connectors.
STARTING THE DEVICE
1
2
3
10
15
6
4
12
13
5
9
7
8
14
11
Содержание NHDR-4308-H2
Страница 1: ...Quick start guide NHDR 4308 H2 ...
Страница 29: ...NHDR 4308 H2 Skrócona instrukcja obsługi ...
