NDR-EB2104 / NDR-EB2208 / NDR-EB2416
User’s manual ver. 1.0
All rights reserved © AAT Holding sp. z o.o.
48
RECORDER’S MENU
After selecting
Setting,
the following screen appears:
ips
column allows to set the recording speed, ranging from 1 to 25 images per second for a given
schedule, both in
Time
and
Event
modes.
Quality
column allows to set the recording quality for a given schedule, both in
Time
and
Event
modes.
Highest, High, Standard, Low
qualities are available.
Resolution
column allows to set the recording resolution for a given schedule, both in
Time
and
Event
modes.
960H allows for recording resolutions: WD1 (944 x 576), WHD1(944 x 288), WCIF
(472 x 288). 720H allows for recording resolutions: D1 (704 x 576), HD1 (704 x 288), CIF (360 x 288).
Use default setting
changes current settings for a given schedule to default values located in
Record
tab.
To remove schedule please select
X
.
Current recording mode is described via a number of status icons displayed on the screen. Their
descriptions are presented below:
- recording not performed (gray color)
- schedule recording (red color)
- emergency recording (video is recorded from all cameras with the speed and quality set in the
Record
tab under
Emergency recording
(red color)
- Event recording (in accordance to the pre-defined parameters for a given schedule, located in the
Event
), (red color)
- Pre-alarm recording (according to parameters defined in the
Event
sub-menu and time defined
in
Pre-event duration
), (blue color)
- motion has been detected
- alarm input has been activated (with their numbers correctly related to the video inputs)
- DVR receiving data in ASCII format (appearance of this icon superimposed on the picture from
the first camera indicates that the data are received via RS-232 port. Icon superimposed on the
picture from the second camera indicates that data are received via RS-485 port)
-
quick copy of recordings is performed in the background (gray color)
-
Mp4 recordings copy is performed in the background (blue color)
-
record copying is performed in the background, (red color)
- lack of video signal
