NOVUS AUTOMATION
25/34
•
Preset:
Allows you to set an initial value for the rising edge, falling edge, and integrator ON/OFF counters.
7.2.4
ANALOG OUTPUTS
Fig. 32
– Analog outputs
•
Tag:
Allows you to set a name, which will be used as an identifier, for the analog output. The field allows up to 24 characters.
•
Operating Range:
Allows you to set the operating range of the analog output, depending on the options:
•
Power On State:
Allows you to set a value for the analog output when the device is turned on and before an analog output value setting com-
mand is received. There are three possible options:
o
Disabled:
Allows the analog output to remain off after device initialization and until a valid command is received.
o
Configured Value:
Allows you to set the value to be adopted in the
Initial Value
parameter after the device initialization and until a valid
command is received.
Power On Value:
Allows you to set the value with which the analogue output starts.
o
Last Valid Value:
Allows the analog output to take the last valid value recorded.
•
Safe Value Watchdog:
Allows you to set a value for the analog output in case of loss of communication.