Novoferm NovoZip, Руководство по установке

Страница: 12 / 24

EN
10
This installation manual must be handed to the customer and must be kept in a safe place throughout the whole period of use!
Figure 4 - Screwing of the pulley assembly.
The pulley assembly (pulley, bearings, motor support, motor and retracted canvas) is then attached to each of the
flags.
GFA TS971 Control
Standard drive
Tormatic Control
Left (option)
SG63F SI 8.180-25,40 drive
Tormatic Control
Right (option)
SG63F SI 8.180-25,40
drive
ATTENTION: This operation involves the upper spacer, whose function is to ensure the required design
distance between the two sets formed by the frame and flag.
6 mm Spacer
* Extra
M8x30
Motor support
Upper spacer
Flag
Pulley assembly
* Extra: Only with a Tormatic Control
on the right side, extra 6 mm spacers
must be placed between the motor
support and the drive.
Spring washer M8
M8x30