Ply 130
™
ply separator
www.flexco.com
—16—
C. Thermocouple connector
(yellow): brown wire
4. Reconnect ground wires to
end plate ensuring wires are
oriented to fit within the
extrusion profile.
Position head plate flush with
the extrusion. Place wires
within slot at end of extrusion
to ensure that the wires aren’t
pinched between the beam
and the head plate. If there
is resistance a wire may be
pinched and must be adjusted.
5. Using 6 mm hex key, screw 4
screws located on rear bottom
end plate.
Bottom End Plate Reassembly
