![Novitool Aero 1225 Скачать руководство пользователя страница 15](http://html1.mh-extra.com/html/novitool/aero-1225/aero-1225_removal-instructions_1712224015.webp)
Ply 130
™
ply separator
—15—
Ü
Bottom Beam End Plate Reassembly:
1. Gently slide electrical tray into beam ensuring wires are free to move and not tangled
and that there is no binding. The tray should slide in with no resistance and the
end plate should fit flush to the extrusion. If there is resistance, check to make sure
wires are not catching. Check the bottom of the press to ensure that the air intake
perforated plate is not showing.
2. Using 6 mm hex key, screw 4 screws located
on front of end plate.
3. Reconnect three connectors inside bottom
beam of press:
A. Heater connector (gray): 2 white wires
and 1 red wire
B. Thermal fuse connector (gray): white wire
Bottom End Plate Reassembly