13
ProCair Quad
User Guide
Operation
- Control Panel
E
Alarm Mute/Panel Lock
Pressing the button briefly turns audible alarm off
temporarily. Alarm will reactivate in 20 minutes if the
issues has not been resolved, or immediately if new
fault detected.
Long-press the button for a minimum of 3 seconds
locks or unlocks the control unit panel to prevent
unintended interference (eg by unauthorised
personnel).
The “LOCKED” light will be lit when the control panel
is locked.
F
Max Inflate
Rapidly inflates mattress to maximum pressure
in Static mode. All pressure setting indicators will
illuminate. No other pressure setting can be selected
when the system is in Max Inflate mode. System will
automatically return to Alternating mode after 20
minutes.
G
Automatic Fowler Boost Indicator
Automatic Fowler Boost mode is activated when the
mattress backrest detected to be inclined by 15° or
more, to increase mattress pressure to accommodate
extra loading in the sacral region. This feature helps to
prevent the risk of bottoming out.
A green “AUTO FOWLER” light illuminates when this
function is active.
It is automatically deactivated when the mattress
backrest is profiled below 5°.
H
Power/Standby and Service Indicator
Press and hold the Power button for at least 3
seconds to turn the system power on and off. A green
light above the button is lit when the control unit is
switched on and running.
The “Standby” light is lit to indicate unit is connected
to mains electricity but not switched on. When
periodical servicing is required, the amber Standby
light will flash. Please contact Novis Healthcare for
system maintenance.
This equipment must only be serviced by a qualified
service agent.
I
Battery In Use Indicator
When mains power is disconnected either
intentionally or unintentionally (eg during a power
outage), the control unit will automatically switch to
backup battery power to provide up to three hours of
continued operation.
The BATT. IN USE light will flash, accompanied by an
audible beeping alarm to indicate the control unit has
switched to battery power, in case the user needs to
take corrective action.
Once the audible alarm has been silenced by pressing
the MUTE button, it will not sound again until mains
power is restored and disconnected again.
J
Battery Charge Indicator
Lights up in green or amber in the following patterns
to indicate battery charging status:
CONTINUOUS GREEN - normal
FLASHING GREEN - charging
CONTINUOUS AMBER - 30% remaining power or less
FLASHING AMBER (with audible alarm) - 10%
remaining power or less
When the light is flashing in amber, immediate
connect control unit to mains power to avoid
interruption to therapy due to power failure
K
Bed Exit Alarm
Pressing the button turns Bed Exit Alarm on and off.
The ON light above button illuminates to indicate the
function is active.
When Bed Exit Alarm is active, as soon as the sensor
bed in the sacral area of the mattress detects patient
egress, it will sound an audible beeping alarm and the
BED EXIT ALARM light will flash.
The alarm may be silenced by pressing the mute
button, when sensor pad detects patient presence or
when the alarm is turned off.
