Novis Pro 600 Series, Инструкция по эксплуатации

Страница: 4 / 144

Deutsch
English
Français
Italiano
Nederlands
Español
Português
Ελλ
ηνικ
ά
Svenska
Norsk
Suomi
Dansk
Polski
Česk
y
عربي
Slo
venščina
Türkçe
3
Care and Cleaning
Normal cleaning of the container
1.
Fill the container half full with warm water.
2.
Add 2-3 drops conventional washing-up liquid to the container.
3.
Place the container fitted with the lid (with inserted measuring cup) correctly on the
drive unit.
4.
Start the cleaning program by selecting it with the program controller « » , and
pressing the start / stop button. For For NOVIS ProBlenders without program functions,
allow the appliance to run at level 2 for about 2 minutes.
5.
Rinse the container thoroughly with warm water and dry.
Intensive cleaning of the container
1.
Fill the container about half full with undiluted vinegar.
2.
Place the container fitted with the lid (with inserted measuring cup) correctly on the
drive unit.
3.
Start the NOVIS ProBlender on speed level 1 and increase to level 4. Allow the unit to
run for about 4-5 minutes and then turn the power off.
4.
Allow the vinegar to act for about 30 minutes.
5.
Rinse the container thoroughly with warm water and dry.
If there is still food residue in the container or on the blade,
carry out a thorough cleaning with warm water and 2-3 drops
of washing-up liquid.
(See instructions: Normal cleaning of the container)
Cleaning of the lid, measuring cup and tamper
The lid, measuring cup and tamper are best cleaned with commercial washing-up liquid in
warm water.
Danger of injury: The blade of the container is sharp. Be
careful when washing or drying the jug when you put your
hand into the container.
Important: To ensure consistent quality, do not clean the
container, tamper, lid and measuring cup in the dishwasher.
Technical data
Nominal voltage 220-240 Volt
Nominal power 1400 Watt
Frequency 50/60 Hertz
Maximum dimensions incl. 1.9L container
(width x depth x height)
22 x 23 x 47 cm
8.6 x 9.1 x 18.5 Inch
Weight 5.7kg / 12.5 pounds
Cable length 1.8m / 70.9 Inch
Material of motor housing Pressure cast
Material of jar/container Tritan
Test method: EN/IEC 60335
(IEC 60335-2-14 and IEC 60335-1)
Warranty 3 years full warranty
10 years warranty for the motor
Frequency band 119Khz-140Khz
Max output power -53.24dBm
PCBA Hardware Version Body: V06A - LCD: V06
Software Version
HT-SOFTWARE-034-A15011A-C-
U201-V08_(20161121)