INSTALLATION
Cable connections
You will need a great number of cables for the different connections of the console. The pic-
tures below show how to connect them. Be sure to use only good quality connectors.
WARNING!
Do not use unbalanced XLR connectors (pins 1 and 3 connected between them) in micro-
phone inputs if you are going to use Phantom Power.
TROUBLESHOOTING
If the problem continues, please contact the repair service.
The unit does not turn on
• Is the unit connected to a proper alternate
current net through the voltage line provided
by the Factory?
It does not sound.
• Are the microphones and other sound
sources correctly connected to the unit inputs
• Are the gain controls and faders correctly
adjusted? Is the main output fader up? (MAIN
MIX)
The sound is weak, distorted or noisy.
• Are the gain controls and faders correctly
adjusted? Is the main output fader up? (MAIN
MIX)
• Are two different instruments connected in
the Microphone XLR Input and line TRS of a
same channel? Please connect only one input
instrument per channel.
• Has the input signal an appropriate level to
enter to the unit?
• Are you using effects in an appropriate level?
• Are the microphones connected to the XLR
inputs?
• If you are using a condenser microphone, is
the Phantom Power (+48V) on?
You can not hear the effects.
• Make sure that the channels that you want to
send to be processed by the effect have the
effect sending switch correctly set up.
• Also note if the effect fader is up.
You want the voices to be heard clearer.
• Adjust the equalization parameters of each
channel.