RETURN
MONO
CONTROL ROOM
PHANTOM POWER
48V
10
PHONES
10
0
-10
-5
5
-15
-20
-30
-50
10
0
-10
-5
5
-15
-20
-30
-50
10
0
-10
-5
5
-15
-20
-30
-50
10
0
-10
-5
5
-15
-20
-30
-50
AUX 1 OUT
LEFT
RIGHT
AUX 2 OUT
SEND
INPUT
LEFT
R
LR
L
RIGHT
OUTPUT
PHONES
CD/TAPE
MAIN OUTPUTS
SUB OUTPUTS
SUB
MIXM
IX
CD/
LEFT
RIGHT
TAPE IN
SUB TO MIX
MIX
SUB
MIX
SUB
PFL
LR
-30
-20
-10
10
CLIP
-7
-4
-2
2
4
7
0
POWER
+48V
10
10
10
RETURN
AUX 2
L
R
10
AUX 1
10
LEVEL
+15
-15
0
HIGH
+15
-15
0
LOW
PFL
MIX
SUB
PEAK
10
0
-10
-5
5
-15
-20
-30
-50
MP3 DIGITAL PLAYER
STOP
PLAY
PREV
NEXT
REP
MIX
SUB
LEVEL
SD
USB
PROGRAM
(PUSH)
MIX
SUB
MUTE
SEND
00 SMALL HALL
03 MID HALL
06 BIG HALL
09 CHURCH
10 SMALL ROOM
13 MID ROOM
16 BIG ROOM
19 CHAPEL
20 PLATE
27 SPRING
30 GATED REV
36 REVERSE
40 EARLY REFL
44 AMBIENCE
48 STADIUM
49 AMBIENCE FX
50 DELAY
59 ECHO
16 CHANNEL ULTRA-SLIM MIXER
NVK-16MUSB
+12
-12
+6
-6
0
+12
-12
+6
-6
0
63
500
4K
6.3K
16K
1K
200
+12
-12
+6
-6
0
+12
-12
+6
-6
0
63
500
4K
6.3K
16K
1K
200
24-BIT MULTI-FX PROCESSOR
60 CHORUS
66 FLANGER
70 PHASER
74 PITCH SHIFT
80 CHORUS &
REVERB
82 FLANGER &
REVERB
84 PHASER & REVERB
86 PITCH & REVERB
88 DELAY & REVERB
90 DELAY & GATED
91 DELAY & REVERSE
92 DELAY & CHORUS
94 DELAY & FLANGER
96 DELAY & PHASER
98 DELAY & PITCH
99 DELAY & PITCH
STEREO GRAPHIC EQUALIZER
DIGITAL FX
PROCESSOR
DSP
FUNCTIONS AND CONTROLS
FUNCTIONS AND CONTROLS
INSERT
LINE IN
MIC
1
60
5
TRIM
dB
10
AUX 1
10
AUX 2
10
R
L
PAN
+15
-15
0
HIGH
+15
-15
0
MID
+15
-15
0
LOW
MUTE
1
PFL
MIX
SUB
PEAK
10
0
-10
-5
5
-15
-20
-30
-50
1
100Hz
1
2
3
4
5
6
7
8
9
10
11
15
16
12
13
14
17
18
19
20
21
24
26
27
25
30
32
33
34
35
37
38
36
39
40
41
41
42
31
22
23
28
29
43
44
46
47
48
49
50
51
52 53
45
1. Microphone
Input
Standard Connector XLR –balanced type.
2. Line
Input
The Standard Connector ¼¨ TRS-type for the line input is designed to accept bal-
anced and unbalanced level signals. Using the gain control, you will be able to use
signals of lower level, adjusting the gain accordingly.
3. Insert
Standard Connector ¼¨ TRS-type for insert. It is usually used for dynamic proces-
sors, the signal is bridged with the connector fully inserted sending and receiving
the signal simultaneously by the same line.
4. GAIN Control (TRIM)
It adjusts the input signal level. To adjust it correctly, set the fader of the channel in
-∞ dB and modify the gain control value so that the maximum signal that can be
received (as a Singer shout) does not turn the PEAK indicator red.
5. High Pass Filter
Pressing this button, it is activated a high pass fi lter of 100HZ. Use it to eliminate
undesired low frequency sounds.
6. Equalizer (High, Mid and Low)
±15dB control centered in the frequencies of 80Hz (LOW), 2.5kHz (MID) y 12kHz
(HIGH)
7. Aux1 Sending control
It adjusts the quantity of signal sent to the Aux 1 output. This is a Pre-fader
sending, that means that the level modifi cations carried out in the mix will not be
refl ected in this output.
8. Aux 2 Sending Control
It adjusts the quantity of signal sent to the Aux 2 output. This is a Pre-fader
sending, that means that the level modifi cations carried out in the mix will not be
refl ected in this output.
9. FX Sending Control
It adjusts the quantity of signal sent to the FX output and to the internal effect of
the console. It is a post-fader sending, that means that the level modifi cations car-
ried out in the mix will be refl ected in this output.
10. Scan Control
It determines the quantity of signal sent to the left and right channels of the main
stereo output. If it is set in the mid position, it will send the same signal to both and
it will have a centered stereo image.
11. MUTE Button
It interrupts the signal fl ow, muting the master and the effects sending.
12. PFL Button
Each channel has the PFL button. Pressing this button the signal is routed to the
Control Room/ Earphone bus.
13. MIX Button
Each cannel has the MIX button. Pressing this button, the signal is routed to the
main output MIX bus (L+R).
14. SUB Button
Each cannel has the SUB button. Pressing this button, the signal is routed to the
output bus SUB and pressing the button SUB TO MIX(36), the SUB signal is routed
to the main output MIX bus(L+R).
15. Peak LED
It shows if the signal is saturated. If the
LED is on, the gain control value should
be reduced.
16. Channel Fader
It adjusts the channel signal level.
17. USB Input
This connector allows you to connect
a storage device USB to reproduce its
content later.
18. SD card input
This connector allows you to connect
SD cards to reproduce its content later.
19. MP3 Player Equalizer
±15dB control centered in the 80 Hz
(LOW) and 12 kHz (HIGH) frequencies.
20. MP3Level control
It establishes the mix signal level of
theMP3 player.
21. MIX/ SUB Routing Button of the MP3
player
This button allows you to select where
the MP3 player signal is routed to.
When being pressed, the signal is
routed to the SUB bus and if it is not
pressed, the signal is routed to the
main output MIX BUS (L+R).
22. MP3 PLAYER Display
23. MP3 PLAYER Controls
STOP (to stop), PLAY/PAUSE (to play/
pause), PREV (previous song), NEXT
(next song), REP (repeat song)
24. Aux 1 Output General Control
It establishes the Pre-fader signal level
sent to the AUX 1 general output.
25. Aux 2 output general control
It establishes the Pre-fader signal level
sent to the AUX 2 general output.
26. Effects Display
27. Effects Selector
Turning this control, you will be able to
choose among the various effects and
pressing the switch, you will confi rm
the selection.
20 CHANNEL ULTRA-SLIM MIXER
NVK-20MUSB