User Manual
ALX 92x
09/2016 | 01
65
Startup and Operation
SETTING AND MONITORING THE MACHINE
Settings in parameter menu
The settings described below are generally included in the print job, in which case they do not
need to be made. Manual settings that were made before a print job was transferred will be over-
written by the settings in the print job.
For further details on setting options in the parameter menu, see section
Label pitch
Switch to offline mode.
To measure label pitch automatically:
Press the FEED + PROG keys.
The printer moves the label material forward until the two label starting marks have moved through
the label sensor. The label pitch determined in this way is displayed and transferred to parameter
PRINT PARAMETERS > Materiallength
. Parameter
PRINT PARAMETERS > Materialtype
is set to "Punched".
Display of the measured label pitch:
To enter the label pitch manually:
1. Measure label pitch [57C].
2. Navigate to
PRINT PARAMETERS > Materiallength
and enter the measured value in millimetres.
[57] Label material (self-adhesive labels)
A
Label web (backing paper)
B
Label
C
Label pitch
D
Material width
Material width
1. Measure the width of the material web [57D] (including backing paper).
2. Enter the measured value in millimetres.
Material type
1. Set
PRINT PARAMETERS > Materialtype
to “Punched”.
2. Set
SYSTEM PARAMETER > Label sens. type
to “Punched”.
OFFLINE X JOBS
xxx.x mm
A
B
C
D
Содержание ALX 924
