Novell ZENWORKS PATCH MANAGEMENT 6.3 - S, Руководство по выпуску

Страница: 8 / 18

Release Notes
- 6 -
Upgrading to ZENworks Patch Management 6.3
To Upgrade to Novell ZENworks Patch Management 6.3
•
Refer to the Novell Knowledgebase for detailed upgrade instructions
•
Following the upgrade to ZENworks Patch Management Server 6.3, you must update your
existing agents. This can be done by manually installing the ZENworks Patch Management
Agent 6.3 or by deploying a Novell provided
.plf
(Vulnerability) from the Vulnerabilities
page within ZENworks Patch Management Server.
Agent Management Center Requirements
Supported Operating Systems
The AMC is supported on the following operating systems:
„
Microsoft Windows Server™ 2003, Standard Edition with SP1
„
Windows Server 2003, Enterprise Edition with SP1
„
Windows Server 2003 R2, Standard Edition
„
Windows Server 2003 R2, Enterprise Edition
„
Microsoft Windows XP Professional with SP2
Minimum Installation Requirements
„
512 MB of RAM
„
200 MB of Free Disk Space (During Installation)
„
100 MB of Disk Space (After Installation)
„
Local / Domain Administrator or Administrator Equivalent
„
Microsoft .NET Framework 1.1
„
Intel Pentium 4 (or equivalent) Processor
Warning: Refer to the “Compatible Products” section of this document when planning
your upgrade to ZENworks Patch Management Server 6.3. If you have an unsupported
product installed, please contact Novell support prior to upgrading your server.
Note: Depending upon the Operating System, the Agent 6.3 upgrade may not report as
applicable to all of your agents. If your agent does not display as applicable, deploy the
patch via the Vulnerabilities > Packages page.