- 15 -
ZENworks Patch Management Server 6.3 - Release Notes
•
Cancel ZENworks Patch Management Server installation and then re-trying the install may
return an error
•
Patch Management Server Installation Continues When Entered E-mail Address is in an Invalid
Format
•
The
New Agent Registration
e-mail notification does not accurately display the device name
and description
•
Uninstalling the agent while the DAU task is running may cause the uninstall to fail
•
After uninstalling the 64 bit Agent for Windows, the control panel icon may remain
•
Content Update Tool: To proceed beyond the Vulnerabilities page, you must not have more than
50 vulnerabilities selected
•
User documentation does not describe the
OS Packs
button added to the
Options > Technical
Support
tab of ZENworks Patch Management Server. The
OS Packs
button will regenerate and
synchronize the relevant information for each of the Operating Systems supported by your
ZENworks Patch Management Server
•
When attempting to install ZENworks Patch Management Server on an unsupported operating
system, .NET 1.1 may be installed before the installation stops
•
When uninstalling an upgraded ZENworks Patch Management Server, various IIS and SQL
warning messages may display.
•
Content Update Tool: The product version is not included on the
Add/Remove Programs
page
•
To use the Content Update Tool the user account must have a password (User accounts without
a password are unable to connect with the ZENworks Patch Management Server)
•
Content Update Tool error messages may not indicate the reason for a connection failure
•
Linux/Unix/Mac/Netware Agent upgrade will fail to stop the DAU task if both
patchlink
and
patchagent
directories exist
•
FastPath is not supported on Windows NT 4.0.
Note
: FastPath configuration data will be ignored by Agents running on Windows NT 4.0.
•
The AMC version displayed on the Agent Installers page is reported incorrectly
•
Agent may wait the FastPath interval before attempting first communication with server
•
The ability to lock a device group’s software, hardware, and services inventory data and
vulnerability status data is not available in this version of ZENworks Patch Management
•
A value of
Non Authenticated
under Route within Hardware Inventory indicates the Agent is
not using a proxy
•
If a Device Group is renamed, the
Group List
column (for each of the member devices) will
continue to display the original group name. The data displayed in the
Group List
column can
be refreshed by removing, and then re-adding, the device(s) from the group.
Tip
: To avoid manual re-entry of the devices, you can use the
Import device from existing
group
function to save the members in a second [temporary] group.
