Novell SENTINEL LOG MANAGER 1.0.0.5 - 03-31-2010, Руководство администратора

Страница: 117 / 168

Configuring Rules 117
no
vd
ocx
(e
n)
19
Fe
bru
a
ry
20
10
2 Click rules in the upper left corner of the page.
3 The Rules tab is displayed on the right pane of the page.
4 Select the Actions tab.
5 Click the Add Action link on the right side of the screen.
6 Select the Log to Syslog action type.
The
Syslog screen appears.
7 Specify an action name. The action name should be unique.
8
Specify a name or IP address and the open UDP port of a syslog server.
If required, click
Test to test if the destination server and port are specified correctly.
9
Click Save . If the action is configured, a
Successfully Added Action
message is displayed.
The newly created action appears under the Actions tab.
Sending the Events by an E-Mail
All Sentinel Log Manager events that meet the filter criteria for which the Send an E-mail action is
defined are sent to the associated SMTP relay and e-mail addresses.
To configure the Send to e-mail action, you need the IP address and port number of an SMTP relay,
and the To and From e-mail addresses. To send events to more than one e-mail addresses, use a
comma-separated list.
NOTE: To avoid overwhelming your SMTP relay or e-mail recipients, this action should only be
used with rules that generate a low volume of events.
This SMTP relay configuration is also used to deliver reports to users.
1 Log in to the Sentinel Log Manager as an administrator.
2 Click rules in the upper left corner of the page.
3 The Rules tab is displayed on the right pane of the page.
4 Select the Actions tab.
5 Click the Add Action link on the right side of the screen.
6 Select the Send an Email action type.