2
Novell Sentinel™ 6.1 SP1 Hotfix 1
On Windows* Vista*, log in as any user if
User Access Control
is enabled. If
User Access
Control
is disabled, you must log in as an Administrator.
On other (non-Vista) Windows systems, log in as an Administrator.
2
Verify that the environment variables for Sentinel are set by running one of the following
commands:
On Linux/Solaris: echo $ESEC_HOME
On Windows: echo %ESEC_HOME%
3
Extract the
<SENTINEL_6.1.1.1.zip>
file.
4
Close all Sentinel applications running on this machine, including:
Sentinel Control Center (SCC)
Sentinel Collector Builder
Sentinel Data Manager
Solution Designer
5
Stop the Sentinel service running on this machine:
On Windows: use
Windows Service Manager
to stop the Sentinel service.
On Linux/Solaris: run the
$ESEC_HOME/bin/sentinel.sh stop
command.
6
Open the command prompt. For most Windows systems and Linux/Solaris, you can log in as
any user to open the prompt. For Windows Vista, you must open the command prompt as an
Administrator using the following instructions.
6a
Go to
Start > All Programs > Accessories
.
6b
Right-click
Command Prompt
, and select
Run as administrator
.
6c
If
User Access Control
is enabled and you are logged in as a user with administrator
privileges, a
User Access Control
window appears to notify that
Windows needs your
permission to continue
.
6d
Click
Continue
. If you are logged in as a user without administrative privileges, you are
prompted to authenticate as an administrative user.
7
On the command line, return to the extracted Hotfix top level directory and run the script to
start the Hotfix installer:
On Windows:
service_pack.bat
On Unix:
./service_pack.sh
8
Press Enter when prompted to start the Hotfix installation procedure.
9
After the installation completes, log out and log in to apply the environmental variable changes.
10
Repeat the above steps on every Sentinel server and client machine that has Sentinel software
installed.
11
Restart Sentinel services on all machines:
On Windows: use
Windows Service Manager
to start the Sentinel services.
On UNIX: run
$ESEC_HOME/bin/sentinel.sh start
NOTE:
This Hotfix also contains a mandatory patch for the Sentinel Database.
12
Apply the database patch. For information on database patch installation, refer to
“Sentinel
Database Patch Installation” on page 3
