Novell PLATESPIN ORCHESTRATE 2.0.2, Руководство по установке и настройке, Страница: 52 / 132

52 PlateSpin Orchestrate 2.0 Installation and Configuration Guide
no
vd
ocx
(e
n)
13
Ma
y 20
09
You can use this
.conf
file to start the Orchestrate Agent and apply the settings either
manually or with an installation script. Use the following command to run the
configuration:
/opt/novell/zenworks/orch/bin/config -rs
7j Click Next to display the following wizard page.
7k Click Next to launch the configuration script. When the configuration is finished, the
following page is displayed:
7l
Click Finish to close the configuration wizard.
IMPORTANT: When the installation and configuration are complete, you need to
register the resources to be managed by the PlateSpin Orchestrate system. Please refer to
Chapter 3, “First Use of Basic PlateSpin Orchestrate Components,” on page 99 for
detailed information about getting resources to manage in the PlateSpin Orchestrate
system.
8
(Optional) Increase the heap size that the JVM handles to enable the console to manage a large
number of objects.
8a
Open the bash shell script at
/opt/novell/zenworks/zos/server/bin
.
8b Inside the script, find the following line where the JVM parameters are defined: