manualshive.com logo in svg

Novell LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009, Руководство пользователя

Поделиться
Скачать
Novell LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009 Скачать руководство пользователя страница 229

/etc/SLEPOS/named/

The

name

directory contains a sample configuration file (

named.conf

) for the

DNS service provided by Branch Servers for Point of Service terminals.

/etc/SLEPOS/rsync/

The

rsync

directory contains the configuration files for the rsync service.

/etc/SLEPOS/rsync/rsyncd.conf

This file contains the

rsync

configuration data for the Administration Server’.

/etc/SLEPOS/rsync/rsyncdbranch.conf

This file contains the Branch Server’s

rsync

configuration data.

/etc/SLEPOS/template/

The

template

directory contains the template files required for the Administration

and Branch Server services.

/etc/SLEPOS/template/branchserver.conf.template

This file contains the template for the Branch Server configuration file.

/etc/SLEPOS/template/dhcpd.conf.header.template

This file contains the template for the DHCP services.

/etc/SLEPOS/template/dns-zonefile.header.template

This file contains the template for the DNS services.

/etc/SLEPOS/template/openldap.template

This file contains

sysconfig

template.

posInitAdminserver.sh

uses this

data for LDAP configuration.

/etc/SLEPOS/template/ldif.pos

This file contains

LDAP

data.

posInitAdminserver.sh

imports this file into

the Administration Server’s openLDAP directory. This file uses the structure of

ldap.pos.template

, but is populated with the names provided during instal-

lation.

/etc/SLEPOS/template/ldif.pos.template

This file contains the template for the

ldif.pos

file.

SUSE Linux Enterprise Point of Service Files and Directory Structure

221

Содержание LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009













































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды