Novell LINUX ENTERPRISE 11 - HIGH AVAILABILITY, Руководство пользователя, Страница: 37 / 298

7 After the initial configuration is done, you need to transfer the configuration to
the other nodes in the cluster. The easiest way to do so is to copy the
/etc/
ais/openais.conf
file to the other nodes in the cluster. As each node needs
to have a unique node ID, make sure to adjust the node ID accordingly after
copying the file.
8
If you want to use encrypted communication, also copy the
/etc/ais/
authkey
to the other nodes in the cluster.
3.3 Bringing the Cluster Online
After the basic configuration, you can bring the stack online and check the status.
1 Run the following command on each of the cluster nodes to start OpenAIS:
rcopenais start
2 On one of the nodes, check the cluster status with the following command:
crm_mon
If all nodes are online, the output should be similar to the following:
============
Last updated: Thu Feb
5 18:30:33 2009
Current DC: d42 (d42)
Version: 1.0.1-node: b7ffe2729e3003ac8ff740bebc003cf237dfa854
3 Nodes configured.
0 Resources configured.
============
Node: d230 (d230): online
Node: d42 (d42): online
Node: e246 (e246): online
After the basic configuration is done and the nodes are online, you can now start to
configure cluster resources, either with the
crm
command line tool or with a graphical
user interface. For more information, refer to Chapter 4, Configuring Cluster Resources
with the GUI (page 31) or Chapter 5, Configuring Cluster Resources From Command
Line (page 59).
Installation and Basic Setup with YaST 27