Novell LINUX ENTERPRISE 11 - HIGH AVAILABILITY Скачать руководство пользователя страница 143 | Manualshive

Страница: 143 / 298

Novell LINUX ENTERPRISE 11 - HIGH AVAILABILITY Скачать руководство пользователя страница 143

15

Troubleshooting

Often, strange problems may occur that are not easy to understand (especially when
starting to experiment with Heartbeat). However, there are several utilities that may be
used to take a closer look at the Heartbeat internal processes. This chapter recommends
various solutions.

15.1 Installation Problems

Troubleshooting difficulties installing the packages or in bringing the cluster online..

Are the HA packages installed?

The packages needed for configuring and managing a cluster are included in the

High Availability

installation pattern, available with the High Availability

Extension.

Check if High Availability Extension is installed as an add-on to SUSE Linux En-
terprise Server 11 on each of the cluster nodes and if the High Availability pattern
is installed on each of the machines as described in Section 3.1, “Installing the
High Availability Extension” (page 23).

Is the initial configuration the same for all cluster nodes?

In order to communicate with each other, all nodes belonging to the same cluster
need to use the same

bindnetaddr

,

mcastaddr

and

mcastport

as described

in Section 3.2, “Initial Cluster Setup” (page 24).

Troubleshooting

133

«
...
141
142
143
144
145
...
»

Содержание LINUX ENTERPRISE 11 - HIGH AVAILABILITY











































































































































































































































































































Отзывы:

Нет отзывов