background image

Schema and Policy Rules For Work Order Management

C

51

no

vd

ocx 

(e

n)

  

17

 Sep

te

m

be

r 20

09

C

Schema and Policy Rules For 
Work Order Management

As part of the installation of the WorkOrder driver, Novell

®

 eDirectory

TM

 is extended to include two 

new object classes. These objects allow the driver to connect to the Identity Vault correctly, perform 
work orders, and create a process log with the work order status.

You can use iManager to create or view these objects in the Identity Vault. See 

Chapter 6, 

“Customizing the Driver,” on page 29

.

Š

Section C.1, “DirXML-WorkOrder Object,” on page 51

Š

Section C.2, “DirXML-WorkToDo Object,” on page 53

Š

Section C.3, “Publisher Placement Rule,” on page 54

Š

Section C.4, “Subscriber Placement Rule,” on page 54

Š

Section C.5, “Subscriber Create Rule,” on page 54

C.1  DirXML-WorkOrder Object

The DirXML-WorkOrder object (sometimes referred to as the WorkOrder object in this 
documentation) is used to tell the driver what tasks to perform. It delays the work order until a date 
and time or until another work order is configured. It also repeats work orders at a given interval.

The following table shows the work order attributes you need to specify:

Table C-1   

WorkOrder Object Attributes

Work Order Attributes 
(eDirectory Namespace)

Description

Type

Description

Description of the work order. The driver 
does not change this attribute. It is passed 
through to the WorkToDo object when the 
work order is processed.

Case ignore string

Common Name

The naming attribute for eDirectory

Case ignore string

DirXML-nwoContact Name

Information about the work order. The driver 
does not change this attribute. It is passed 
through to the WorkToDo object when the 
work order is processed.

Case ignore string

DirXML-nwoContent

This attribute is passed through to the 
WorkToDo object. It is used by policies to 
process the work order.

Case ignore string

DirXML-DueDate

The date and time the work order is to be 
processed.

Time

Содержание IDENTITY MANAGER 3.6.1 - STAGING BEST PRACTICES GUIDE 2010























































Отзывы: