Driver Properties
A
27
no
vd
ocx
(e
n)
17
Sep
te
m
be
r 20
09
A
Driver Properties
This section provides information about the Driver Configuration and Global Configuration Values
properties for the Null Service driver and the Loopback Service driver. These are the only unique
properties for drivers. All other driver properties (Named Password, Engine Control Values, Log
Level, and so forth) are common to all drivers. Refer to “
Driver Properties
” in the
Identity Manager
3.6.1 Common Driver Administration Guide
for information about the common properties.
The properties information is presented from the viewpoint of iManager. If a field is different in
Designer, it is marked with a icon.
Section A.1, “Driver Configuration,” on page 27
Section A.2, “Global Configuration Values,” on page 29
A.1 Driver Configuration
In iManager:
1
In iManager, click
to display the Identity Manager Administration page.
2
Open the driver set that contains the driver whose properties you want to edit. To do so:
2a
In the
Administration
list, click
Identity Manager Overview
.
2b
If the driver set is not listed on the
Driver Sets
tab, use the
Search In
field to search for and
display the driver set.
2c
Click the driver set to open the Driver Set Overview page.
3
Locate the driver icon, then click the upper right corner of the driver icon to display the
Actions
menu.
4
Click
Edit Properties
to display the driver’s properties page.
5
Click
Driver Configuration
.
In Designer:
1
Open a project in the Modeler.
2
Right-click the driver icon or line, then select click
Properties > Driver Configuration.
The Driver Configuration options are divided into the following sections:
Section A.1.1, “Driver Module,” on page 28
Section A.1.2, “Driver Object Password (iManager Only),” on page 28
Section A.1.3, “Authentication,” on page 28
Section A.1.4, “Startup Option,” on page 29
Section A.1.5, “Driver Parameters,” on page 29
Section A.1.6, “ECMAScript (Designer Only),” on page 29
