manualshive.com logo in svg

Novell GROUPWISE 7 - WEB ACCESS, Руководство пользователя, Страница: 80 / 110

Поделиться
Скачать
Novell GROUPWISE 7 - WEB ACCESS Скачать руководство пользователя страница 80

932

GroupWise 7 Administration Guide

no

vd

ocx (

e

n)

  1

1

 Decemb

er

 2

007

56.1.3  Using Novell Remote Manager

If the WebAccess Agent is running on NetWare 6.5 or on Novell Open Enterprise Server (OES), you 
can use the IP Address Management feature in Novell Remote Manager (Manage Server > IP 
Address Management) to view the IP address and port configuration for the WebAccess Agent. This 
is also true for other GroupWise agents (MTA, POA, and Internet Agent) running on NetWare 6.5/
OES servers.

IMPORTANT: 

If the WebAccess Agent is running on NetWare in protected mode, it does not 

display in Novell Remote Manager.

You access Novell Remote Manager by entering the following URL in a Web browser:

http://

server_address

:8008

For example:

http://172.16.5.18:8008

For more information about using Novell Remote Manager, see the 

NetWare 6.5 documentation 

(http://www.novell.com/documentation/nw65)

 and the 

Novell Open Enterprise Server 

Documentation Web site (http://www.novell.com/documentation/oes)

.

56.1.4  Using an SNMP Management Console 

The WebAccess Agent can be monitored through an SNMP management console, such as the one 
provide with Novell

®

 ZENworks

®

 Server Management.

Before you can monitor the WebAccess Agent through an SNMP management console, you must 
compile the WebAccess Agent’s MIB (Management Information Base) file. The Internet Agent’s 
MIB file, named 

gwweb.mib

, is located in the 

agents\snmp

 directory on the 

GroupWise 7 

Administrator

 CD or in the GroupWise software distribution directory.

The MIB file contains all the Trap, Set, and Get variables used for communication between the 
WebAccess Agent and management console. The Trap variables provide warnings that point to 
current and potential problems. The Set variables allow you to configure portions of the application 
while it is still running. The Get variables display the current status of different processes of the 
application.

To compile the MIB file:

1

Copy the WebAccess Agent MIB (

gwweb.mib

) to the SNMP management console’s MIB 

directory.

2

Compile the MIB file.

3

Create a profile that uses the WebAccess Agent MIB, then select that profile. 

56.1.5  Assigning Operators to Receive Warning and Error 
Messages

You can select GroupWise users to receive warning and error messages issued by the WebAccess 
Agent. Whenever the agent issues a warning or error, these users, called operators, receive a 
message in their mailboxes. You can specify one or more operators.

To assign an operator:

Содержание GROUPWISE 7 - WEB ACCESS















































































































Отзывы:

Нет отзывов