Using GroupWise Monitor
1015
no
vd
ocx (
e
n)
1
1
Decemb
er
2
007
2
Select a history log file > click
View
.
61.4.5 Viewing an Agent Performance Report
A performance testing report enables you to measure how long it takes messages to travel through
your GroupWise system. The performance testing report lists each domain that a performance test
message was sent to, when it was sent by the Monitor Agent, and the number of seconds between
when it was sent and when the Monitor Agent received a response from the tested agent.
At the Windows
Monitor Agent server console
or
Monitor Agent Web console
:
1
Click
Reports > Performance Testing
.
2
Select
All Domains
to generate a performance testing report for all domains in your GroupWise
system.
or
Select one domain to generate a performance testing report for it.
3
Click
Run
to generate the performance testing report.
61.4.6 Receiving Notification of Agent Performance Problems
If you want the Monitor Agent to notify you if system performance drops to an unacceptable level,
you can create a threshold to check the mtaLastResponseTime and mtaAvgResponseTime MIB
variables. The average response time is a daily average that is reset at midnight. See
Section 59.5.2,
“Customizing Notification Thresholds,” on page 981
for setup instructions.
61.5 Collecting Gateway Accounting Data
To gather gateway accounting data for a gateway, you set up a specially configured Monitor domain.
The Monitor Agent then measures the traffic that passes through the gateway.
Perform the following steps to set up gateway accounting:
Section 61.5.1, “Setting Up an External Monitor Domain,” on page 1015
Section 61.5.2, “Selecting an MTA to Communicate with the Monitor Agent,” on page 1016
Section 61.5.3, “Setting Up an External Post Office and External User for Monitor,” on
page 1017
Section 61.5.4, “Receiving the Accounting Files,” on page 1017
Section 61.5.5, “Viewing the Gateway Accounting Report,” on page 1018
61.5.1 Setting Up an External Monitor Domain
Before you can run a gateway accounting report, you must create a specially configured Monitor
domain and select an MTA to transfer accounting data to and from the Monitor Agent. The Monitor
Agent uses an external GroupWise domain as part of this process.
In ConsoleOne
®
:
1
Create an external GroupWise domain.
