Novell CLIENT FOR LINUX 1.1, Руководство по установке и администрированию

Страница: 16 / 46

16 Novell Client 1.1 for Linux Installation and Administration Guide
no
vd
ocx
(E
NU)
9 Decem
ber
200
5
YaST displays the progress of the package installation.
9 After all the packages have been installed, select Quit to close the YaST Control Center.
10 Start the Novell Client for Linux.
See
Section 2.4, “Starting or Restarting the Novell Client for Linux,” on page 16 .
2.4 Starting or Restarting the Novell Client for
Linux
There are several ways to start or restart the Novell Client for Linux.
• Restarting the Linux Workstation: This is the best way to ensure that the Novell Client for
Linux is completely restarted.
• Manually Starting the Novell Client: Open a terminal window and log in as root. From the /
opt directory, enter one of the following commands:
• New Installations:
/opt/novell/ncl/bin/ncl_control start
This command loads all Novell Client for Linux daemon modules.
• Updates:
/opt/novell/ncl/bin/ncl_control restart
This command stops and then reloads all Novell Client for Linux daemon modules.
If either of these commands displays any errors, restart the Linux machine.
In addition,
/opt/novell/ncl/bin/ncl_control status
shows whether the NCL
drivers are loaded properly or not, and
/opt/novell/ncl/bin/ncl_control stop
stops
all Novell Client for Linux daemon modules.
The
ncl_control restart
command is run automatically at the end of the installation of the
Novell Client packages.
2.5 Uninstalling the Novell Client for Linux
You can uninstall the Novell Client for Linux using either of the following methods:
• Section 2.5.1, “Uninstalling Using the YaST Control Center,” on page 16
• Section 2.5.2, “Uninstalling Using the Installation Script,” on page 17
2.5.1 Uninstalling Using the YaST Control Center
1 Launch the YaST Control Center.
NLD GNOME: Click System > Administrator Settings .
NLD KDE: Click the menu button > System > YaST .
2 Click Software in the left column, then click Install and Remove Software in the right column.
3 Click Selections in the Filter drop-down list.
4
Select the check box to the left of Novell Client for Linux until a trash can appears.
This automatically selects all of the packages that need to be deleted.
5 Click Accept to delete all of the selected packages.
YaST displays the progress of the uninstall.