Novell APPARMOR 1.2, Руководство администратора, Страница: 27 / 130

Add Profile Wizard
For detailed steps, refer to Section 3.3.1, “Adding a Profile Using the Wizard”
(page 27).
Manually Add Profile
Add a Novell AppArmor profile for an application on your system without the help
of the wizard. For detailed steps, refer to
Section 3.3.2, “Manually Adding a Profile”
(page 34).
Edit Profile
Edits an existing Novell AppArmor profile on your system. For detailed steps, refer
to
Section 3.3.3, “Editing a Profile” (page 39).
Delete Profile
Deletes an existing Novell AppArmor profile from your system. For detailed steps,
refer to
Section 3.3.4, “Deleting a Profile” (page 41).
Update Profile Wizard
For detailed steps, refer to Section 3.3.5, “Updating Profiles from Syslog Entries”
(page 42).
AppArmor Reports
For detailed steps, refer to Section 4.3, “Reports” (page 81).
AppArmor Control Panel
For detailed steps, refer to Section 3.3.6, “Managing Novell AppArmor and Secu-
rity Event Status” (page 47).
3.3.1 Adding a Profile Using the Wizard
The Add Profile Wizard is designed to set up Novell AppArmor profiles using the
Novell AppArmor profiling tools, genprof (Generate Profile) and logprof (Update
Profiles From Learning Mode Log File). For more information about these tools, refer
to
Section 3.5.3, “Summary of Profiling Tools” (page 56).
1 Stop the application before profiling it to ensure that the application start-up is
included in the profile. To do this, make sure that the application or daemon is
not running prior to profiling it.
Building Novell AppArmor Profiles 27