Novatron Xsite EASY, Руководство пользователя

Страница: 6 / 55

1.1 Safety instructions
This section outlines all important safety matters concerning the optimal safety of personnel as well
as failure-free operation. These instructions shall enable users to recognize potential risks of use
and, as far as possible, prevent them in advance. Every user has to understand and observe these
instructions.
Caution
The product must not be solely relied on for the operation of the machine. The
operator must maintain a proper view of the operating area at all times.
Conventional use
The product has been exclusively designed and constructed for conventional use as described
here.

Positioning the bucket of an excavator with the help of gravitation sensors, laser receiver, or
other sensors.

Indication of the position of the measuring point to the user.

Comparison of the position of the measuring point with various types of reference
information.
Any other use not listed here, as well as any application not complying with the technical data, is
not considered conventional use.
Improper use

Non-conventional use

Exceeding the limit values given on the data sheet

Use of the product without instructions

Use of the product beyond the limits of use

Invalidation of safety equipment

Removal of indicating or warning labels

Opening, rebuilding or alteration of the product

Use of the product in spite of obvious defects or damages

Use of the product with unauthorized accessories from other manufacturers

Use of the product at insufficiently secured construction sites
Alteration and rebuilding of the product
To prevent risks and ensure optimal performance, alterations, attachments or rebuilding of the
product may not be carried out without the manufacturer’s explicit permission.
The foremans’s responsibility
The product is used in the industrial sector. The foreman of the product is therefore subject to legal
responsibilities for operational safety. In addition to the operational safety instructions in this
manual, the relevant safety, accident prevention and environmental protection regulations for the
area in which the product is operating must also be observed.
Xsite EASY | User manual | Page 3 of 52