Novatron Xsite EASY, Руководство пользователя

Страница: 49 / 55

10 TARGET LEVELS
The user can set four reference levels: top level, up level, target level and low level. To set limits for
the reference levels, go to “Main menu” → “Target levels” → “Limits”. Choose the level to be edited
using the “Right” and “Left” arrow keys and press “EDIT”. Levels, XD2 colours, default values and
sounds are shown in Table 9.
Table 9. Target level default settings
Level XD2 colour Default values Sound
Top level Yellow arrow downwards Above the zero level 8 to 15 cm _¯ _¯ _¯ _¯ _¯ _¯
High level Blue arrow downwards Above the zero level 3 to 8 cm ̶ ̅ ̶ ̅ ̶ ̅ ̶ ̅ ̶ ̅
Target level Green line Zero level ±3 cm ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶
Low level Red arrow upwards Below the zero level 3 to 8 cm ̶ _ ̶ _ ̶ _ ̶ _ ̶
To switch the target level sounds ON or OFF, go to “Main menu” → “Display unit” → “Sounds” and
press the “OK” button on the “Target” selection.
The target level mode is the setting that determines which measurement type the target level
function complies with. Set the target level mode in “Main menu” → “Target levels” → “Mode”.
Choose depth, distance, slope, laser jobsite height, or auto as the target level (see Table 3). By
choosing auto, the target level function always complies with the measurement type that is shown
on the top left part of the screen.
The jobsite target level can be adjusted in “Main menu” → “Laser” → page 2/3 “Jobsite target
height”. For example, if the laser jobsite height is 100 m (rotating laser is set to 100 m) and the
jobsite target height is 95 m, the XD2 LED display shows a green light when the bucket measuring
point is 5 m below the laser beam.
10.1 XD2 LED display
The XD2 LED display is an optional accessory (Figure 61). The XD2 indicates the height difference
between the bucket measuring point and the target surface by light signals. In Figure 61, the
bucket measuring point is currently at the target surface.
To set the brightness of the XD2 LEDs, go to “Main menu” → “Target levels” → “Limits” and select
the 5/5 page. Select “LIST” and choose “Bright”, “Medium” or “Dim”.
Xsite EASY | User manual | Page 46 of 52
Figure 61. XD2 LED patterns. (1) = Top/yellow level, (2) = High/blue level, (3) = Target/green level,
(4) = Low/red level