manualshive.com logo in svg

Novation Impulse, Руководство пользователя, Страница: 3 / 43

Поделиться
Скачать
Novation Impulse Скачать руководство пользователя страница 3

3

English

IMPORTANT SAFETY INSTRUCTIONS

1.   Read these instructions.

2.   Keep these instructions.

3.   Heed all warnings.

4.   Follow all instructions.

5.   Clean only with dry cloth.

6.    Do not install near any heat sources such as radiators, heat registers, stoves, or other 

apparatus (including amplifiers) that produce heat.

7.     Protect the power cord from being walked on or pinched particularly at plugs, convenience 

receptacles, and the point where they exit from the apparatus.

8.   Only use attachments/accessories specified by the manufacturer.

9.    

Use only with the cart, stand, tripod, bracket, or table specified by the 

manufacturer, or sold with the apparatus. When a cart is used, use caution 

when moving the cart/apparatus combination to avoid injury from tip-over. 

10.   Unplug this apparatus during lightning storms or when unused for long periods of time.

11.    Refer all servicing to qualified service personnel. Servicing is required when the 

apparatus has been damaged in any way, such as power-supply cord or plug is damaged, 

liquid has been spilled or objects have fallen into the apparatus, the apparatus has been 

exposed to rain or moisture, does not operate normally, or has been dropped. 

12.  No naked flames, such as lighted candles, should be placed on the apparatus.

WARNING:

 Excessive sound pressure levels from earphones and headphones can cause 

hearing loss.

WARNING:

 This equipment must only be connected to USB 1.1 or 2.0 ports.

Содержание Impulse












































Отзывы:

Нет отзывов