Ex-Power DEFENDER – Operation and Maintenance Manual
Novatio Engineering Confidential Document
2-4
2.3
Parallel AC Operation Connections
These connections are used for connecting two Ex-Power DEFENDER generators for parallel
operation. Parallel AC operation cables (optional equipment) are required for parallel operation.
(Optional parallel cable assemblies are available from Novatio.)
Figure 2-6: Parallel AC Operation Connections Using Optional Cable Assembly
2.4
DC Receptacle and DC Circuit Protector
The DC receptacle (shown below) should ONLY be used for charging 12-volt automotive type
batteries. The DC charging output is not regulated.
The DC circuit protector automatically shuts off the DC battery charging circuit when the DC
charging circuit is overloaded, when there is a problem with the battery, or when the connections
between the battery and the generator are improper. However, the circuit protector does not
prevent overcharging.
Figure 2-7: DC Receptacle (Used with Optional DC Cable)
PARALLEL AC CABLE
CONNECTIONS
GROUND CABLE
