Installation
Chapter 2
ProPak6 Installation and Operation User Manual Rev 4
33
NovAtel Connect is a windows based GUI used to access the receiver's many features without the need
for communications protocol or other special software. The Convert utility is a windows based utility used
to convert between file formats and strips unwanted records for data file compilation.
2.9
ProPak6 Security
2.9.1
Administration Password
An Administrator password is available to secure FTP and ICOM ports. The default Administrator
password is the Product Serial Number (PSN) of the receiver and the predefined user name is “admin”.
An Administrator has read/write access and the ability to change passwords, issue commands, upload
files to the FTP server or upload new firmware.
A password can be up to a maximum of 28 characters/digits. The “admin” user name cannot be changed.
Use the
SETADMINPASSWORD
command to change the default password.
Refer to the
OEM6 Firmware Reference Manual
- OM-20000129 for command details.
2.9.2
FTP Server and ICOM Ports
The FTP server is disabled by default. The
IPSERVICE FTP_SERVER
command is issued to enable or
disable the FTP server port. Refer to
Section 3.7.1.5, Remote Retrieval of Logged Data
instructions on enabling the FTP port.
For security purposes, the
IPSERVICE SECURE_ICOM
command can also be used to enable password
security on the ICOM ports. When security is enabled, the port refuses incoming commands until a valid
User Name and Password are entered using the
LOGIN
command. Once logged in to an ICOM port, use
the
LOGOUT
command to sign out of the connection and resecure the port. Refer to
for further details.
Refer to the
OEM6 Firmware Reference Manual
- OM-20000129 for details on the
IPSERVICE
command.
2.10 Next Steps
Once the physical installation is complete and power is applied, various ports and radios need to be
enabled and/or configured. Refer to the upcoming chapters for operation and configuration details.
If using Ethernet, the port needs to be configured prior to use. Refer to
for configuration instructions.
The Administrator password should be changed prior to using the FTP server or ICOM
ports.
Example:
Label is located on the bottom of the ProPak6
