Novatel OEM719, Инструкция по установке и эксплуатации

Страница: 70 / 235

Chapter 3 OEM7 Receiver Operation
OEM7 Installation and Operation User Manual v4 70
Figure 27: Transfer FINE Time from Fine Clock to Warm Clock Receiver
If Receiver 2 is not in coarsetime, the input is ignored.
Figure 28: 1 PPS Alignment
The examples shown in Figure 25: Transfer COARSE Time from Fine Clock to Cold Clock
Receiver on page 68, Figure 26: Transfer FINE Time from Fine Clock to Cold Clock
Receiver on the previous page and Figure 27: Transfer FINE Time from Fine Clock to
Warm Clock Receiver above are for the transfer of time. If a position is needed, the
receiver must be tracking satellites and must have a valid almanac.