Novatel MT 1200, Руководство пользователя

Страница: 30 / 49

CAUTION! If the device is already connected to vehicle power, remove the in-line fuse on the
MAIN POWER (+V) wire of the device power cable before connecting any of the IO.
l
For added security as an indicator against tampering, use torque/tamper seal on Molex, ground
and fuse connections.
Mounting Locations
When mounting the device, the Novatel Wireless logo (GPS antenna side) must be facing up or out with
a clear view of the sky. Select the best location for mounting the device within the vehicle, such as one
of the following locations:
l
Above the air vents
l
Above the steering wheel
l
Above the instrument cluster
l
Above the glove box
NOTE: Avoid locations identified
with a red X.
CAUTION! Both the cellular and GPS antennas are internal to the device (depending on the model).
Therefore, it is critical to get the device mounted as high on the dashboard as possible with minimal
obstructions above it.
Mounting Methods
Mounting Bracket Used
The preferred method for mounting and securing the MT 1200 inside a vehicle is to use the
recommended Mounting Bracket Assembly (70015024). The bracket allows for mounting the device so
that the label location conforms to the installation location.
The bracket can be installed using two #6 screws (preferred method) or with double-sided tape.
CAUTION! If double-sided tape is used (or another method not described in this guide), note the
following precautions.
MT 1200 User Guide 26