background image

61

Regulatory Statements

Federal Communications Commission Notice (FCC – United States)

Electronic devices, including computers and wireless modems, generate RF energy incidental to their 

intended function and are therefore subject to FCC rules and regulations.

This equipment has been tested to, and found to be within the acceptable limits for a Class B digital device, 

pursuant to part 15 of the FCC Rules and Industry Canada ICES-003. These limits are designed to provide 

reasonable protection against harmful interference when the equipment is operated in a residential 

environment.

This equipment generates radio frequency energy and is designed for use in accordance with the 

manufacturer’s user manual. However, there is no guarantee that interference will not occur in any particular 

installation. If this equipment causes harmful interference to radio or television reception, which can be 

determined by turning the equipment off and on, you are encouraged to try to correct the interference by 

one or more of the following measures.

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and the receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/television technician for help.
This device complies with Part 15 of the Federal Communications Commission (FCC) Rules. Operation is 

subject to the following two conditions.

•  This device may not cause harmful interference.
•  This device must accept any interference received, including interference that may cause undesired 

operation.

WARNING:  DO NOT ATTEMPT TO SERVICE THE WIRELESS COMMUNICATION DEVICE YOURSELF. SUCH ACTION 
MAY VOID THE WARRANTY. THE MiFi 4510L MODEM IS FACTORY TUNED. NO CUSTOMER CALIBRATION OR 
TUNING IS REQUIRED. CONTACT NOVATEL WIRELESS TECHNICAL SUPPORT FOR INFORMATION ABOUT 
SERVICING YOUR WIRELESS COMMUNICATION DEVICE.

FCC CAUTION

:  Any changes or modification not expressly approved by the party responsible for compliance 

could void the user’s authority to operate this equipment.

MODIFICATIONS: 

The FCC requires that you be notified that any changes or modifications made to this 

device that are not expressly approved by Novatel Wireless, Inc. may void your authority to operate the 

equipment. 

DRAFT

Содержание MiFi 4510L











































Отзывы: