3
MOUNTING PLATE (NOVATEL P/N 01018317)
ANTENNA CARE
The GNSS-501, GNSS-502 and GNSS-503 are designed to withstand the elements, including rain, snow
and dust. However, to ensure your antenna performs optimally, keep the radome (the top surface of the
antenna) clean and brush off any ice and snow.
The optimal screw penetration into the mounting holes is 6 mm (±1 mm) deep. When selecting
screws for mounting, ensure the screw penetration does not exceed this specification. Using
excessively long screws can damage the antenna enclosure.
Two magnetic mounts are installed on
the bottom of the antennas. Refer to
on page 2 for the
location of the magnetic mounts.
Dimensions are in inches.
